Microwave vehicle parking system

This product is a high-power electromagnetic launch equipment, can be non-contact, the way to force suspicious vehicle flameout, the system does not cause fatal injury to drivers and vehicles, the premise, in a non-violent, non-lethal manner. The working principle of the microwave vehicle forced stop system is to use high-power electromagnetic wave which radiates directionally to the suspect vehicle. After multi-dimensional electromagnetic coupling, it can interfere with the engine computer (Ecu) , ignition circuit, key sensors and so on of the target vehicle, the misfiring signal causes the vehicle engine to fail to burn properly, causing the engine to stall and the vehicle to lose power and slow down until it stops. The microwave vehicle forced stop system can be set up according to the customer’s requirement and application scenario, and work in the form of fixed station or vehicle. The weight of the equipment is less than 200kg, and the average power is less than 1kW when the vehicle is forced to stop, therefore, it can be operated by city power or storage battery, the working state of the equipment can be controlled accurately and remotely by isolating optical fiber, and the operation safety is high. At the same time, in order to reduce the influence of the equipment and other vehicles and operators when working, the design of the electromagnetic beam radiated by the device has directivity. EFFECTIVE WORKING DISTANCE: 3 ~ 15m beam width: ± 20 ° system continuous working time: ≥1Min power supply mode: AC220V OR ON-BOARD POWER INPUT POWER: ≤1KW system weight: ≤200kg system maintenance cycle: 120 forced stops

Colors and styles can be customized