Shoulder lamp

Technical parameters: Shoulder Lamp is composed of Integrated Circuit Board, lithium battery, PC transparent cover board, ABS base and shoulder clamp. Quality: 38G; Working Mode: multi-mode red and blue LED flash (front flash, back flash, front and back flash) and white lighting. Flicker frequency: 8.3 hz. Power adaptability: when the power supply voltage DC3.6 V ~ DC4.0 V range changes, should be able to work properly. The working current is ≤45ma for flicker and ≤35mA for white light. Working time of the battery: After the battery is fully charged, the working time is ≥18 hours. Shell Protection Grade: the Shell Protection should meet the requirements of IP54 in GB4208-2008. Visible Distance: Bright Light can be observed by naked eye at 300m at night (should be reflected in the test report) . Implementation Standards: In line with the GB4208-2008“Shell Protection Level”in the relevant provisions. To provide inspection reports issued by the state-level product quality supervision and inspection institutions, including the scope of acceptance and inspection of this tender products.

Technical parameters: rated voltage: 4.0 v Flash: 6 HZ PULSE CURRENT MAXIMUM: 80mA one-time charging maximum working time: ≥20H working mode: strobe, lighting flash color: red, blue visible distance: 500M installation mode: Metal Clip Operating Environment:-30 °C -- 50 °c weight: 0.1 kg operating instructions: press the switch for 2 seconds to start working of lighting lamp, press the flash lamp again for 2 seconds, then press the switch to turn off all work etc. . After charging, please press the switch to start the one-time circuit protection after work, you need to use the charger interface insert activation. Size: 70 * 47 * 39MM LED warning shoulder lamp is a safety warning lamp developed by our company in accordance with the market demand. The lamp is portable, small in size and light in weight. It uses high-capacity lithium battery and takes a long time for one charge, can Be used as a warning and lighting, can be used for traffic duty, road traffic law enforcement officers, road workers and pedestrians at night road safety warning. Led Control through the digital module to achieve the effect of STROBOSCOPIC, playing a very obvious warning role, reminding the past driver Flash Place Staff, careful driving, thus protecting the safety of the wearer.

Technical Parameters: Appearance Color: Red and blue power supply mode: BUILT-IN LITHIUM BATTERY CAPACITY: 3.7 v/600mAH charging interface: DC3.5, inside, outside, negative continuous working time: & Gt; 12-hour scintillation speed: 4-3-2-2 variable scintillation mode: alternating red and blue, fULL FLASH WATERPROOF GRADE: IP65 OPERATING TEMPERATURE:-20 °C Foshan + 60 °C profile size: 85 * 37 * 32 Product Weight: 120g fixed mode: rotatable shoulder clip other functions: Flash Stop, lighting, low pressure mode when shoulder lamp is off, finger points on one end of the shoulder lamp function keys, followed by flashing, lighting, off. Sequential Cycle. At the same time, the direction of the light body can be rotated to warn pedestrians or vehicles in different directions. In the flashing state, light tap shoulder lamp (lighting part) can make it in the flashing and dormant state to switch in turn, stainless steel metal clip, can 360 degrees arbitrary rotation.

Colors and styles can be customized