Breathalyzer
Technical parameters alcohol sensor type: electrochemical fuel cell type alcohol sensor measurement mode: rapid screening, automatic exhaust mode: Motor continuous exhaust, exhaust speed not less than 0. 8l/min voltage lower limit alarm: when the power supply voltage is lower than the specified voltage lower limit, check the wine detector should be able to issue an alarm signal. Drunk tip: When the detected person drink driving, in addition to display the number and test results of alcohol screening device should be vibration, lighting, voice and so on one of the living several kinds of auxiliary tips. Continuous measurement: The built-in power supply should be able to continuously measure not less than 500 times. Preheating time: 2.5 SECONDS MEASUREMENT STORAGE: Measurement results in the form of icons and figures on the screen, measurement results should be able to be stored. Sensitivity: Distance 5cm, sensitivity ≥20mg/100ml, distance 15cm, sensitivity ≥8mg/100ml memory residual effect: No more than 6mg/100ml double zero: With Automatic Double Zero Function, double zero time less than 2 minutes; when Double Zero, when the residual concentration does not fall to 8mg/100ml, we can’t test it. Implementation Standard: Q/JST003-2016 rapid screening alcohol content tester
Colors and styles can be customized

公眾號
Service Hotline:

公眾號
Copyright ? 2015 - 2018 test.com All Rights Reserved 渝ICP備2022002103號-1
Copyright ? 2015 - 2018 test.com All Rights Reserved
- 業務咨詢
- 郵件聯系
- 咨詢電話 18623343215
- 返回頂部