Through metal detector gate

Technical parameter:

Footpath: 1) sufficient passageway space and reasonable floor area: Height (Z direction) not less than 2000mm; width (x direction) not narrow with 730mm; depth (y direction) not long with 910mm. 2) make it easy for people to walk through, without the following: Sharp edges that may tear clothing or scratch the skin; protrusions that are more than 5 mm high or have a curvature radius of less than 2 mm on the head; exposed wires or suspended objects. Operation Control: 1) authorization of Operation: In addition to the control devices and working parameters necessary to make the detector work, other devices and parameters that affect the detection performance are protected to avoid unauthorized personnel tampering. 2) key and control device: The key and control device are flexible in operation, clear in feeling and reliable in function. If equipped with a remote control, the control distance is at least 2 m. Detection Performance: 1) detection sensitivity range: can be easily adjusted from low to high, and cover at least one detection level.(2) detection uniformity: (1) when the following test objects pass through the detection door: Grade A: The Standard Tester carries 0.08 mm x 37 mm x 10 mm stainless steel plate, at a speed close to 1.0 m/s, when the detection door passes through various positions of the detection door, the system will give an alarm without missing alarm or false alarm. Class B: Standard Tester carrying φ6X50mm tool steel, passing through the probe door at various positions at a speed of nearly 1.0 m/s. System alarm, there will be no missing alarm or false alarm. Class C: Standard Tester carrying 1.5 mm x 80 mm x 20 mm plain stainless steel plate passing through the detection gate at speeds of approximately 1.0 m/s from the ground, 100 mm to 1700 mm, respectively. System alarm, there will be no missing alarm or false alarm 2 when the following test objects pass through the detection door: Class A: The Standard Tester at a speed close to 1.0 m/s, respectively 1900 mm above the ground height, 100 mm ~ 1700 mm through the detection door, the system does not alarm, there will be no missing alarm or false alarm. Class B: The Standard Tester carries 1.5 mm x 40 mm x 4mm semi-hard brass plate, at nearly 1.0 m/s speed, 1900 mm above the ground, 100 mm ~ 1700 mm through the detection door, the system does not alarm, there will be no missing alarm or false alarm. Class C: The Standard Tester carries 1.5 mm x 50 mm x 10 mm ordinary stainless steel plate, at nearly 1.0 m/s speed, 100 mm ~ 1700 mm above the ground respectively through the detection door, the system does not alarm, there will be no missing alarm or false alarm.3) passing speed: 1 when the Standard Tester carries the Φ6X50MM tool steel through the detection door with the speed approaching 0.4 m/s ~ 1.8 m/s, the system gives an alarm. 2 when the standard tester carries 1.5 mm x 40 mm x 4mm semi-hard brass plate through the detection door at a speed of close to 0.4 m/s ~ 1.8 m/s, the system does not give an alarm. 4) continuous working time: 8 hours continuous work, stable work. 5) counting function: The Standard Tester carrying 1.5 mm x 80 mm x 20 mm ordinary stainless steel plate can reliably record the effective number of examinees and the number of people who have had an alarm when crossing the detection gate at 1250 mm above the ground at a constant speed with normal direction and natural gait. ALARM INSTRUCTION CHECK: ALARM SOUND: 1) is different from non-alarm sound. 2) the tone can be adjusted so that the alarm of two adjacent detector doors can be clearly distinguished. 3) can be adjusted from mute to Max. Sound level, Max. Sound level 89.8 DB.Alarm display: 1) and non-alarm display is different, the color with red. 2) the location is clear and accurate. 3) in the bright environment of 6000Lx and the dark environment of 25Lx, it can be clearly seen at the distance of 3m from the alarm display. Alarm state recovery: the detection door has the ability of automatic recovery of alarm state. Under the condition of automatic recovery, the alarm indication is not more than 1.2 seconds after the alarm test object leaves the detection area. MAGNETIC INDUCTION LIMIT: 13 μt at any point in the 150 mm region formed inwards at the left and right edges of the magnetic induction.Internet management features: The device can connect to the Internet via a wifi device or cable, remotely diagnose via a mobile APP, manage settings, and view data stored in the cloud. Human Body temperature test function: The equipment has the human body temperature test function. Insulation resistance: Normal Condition > 500M ω, wet and hot condition: 80M ω. RADIO FREQUENCY ELECTROMAGNETIC FIELD IMMUNITY: SWEEP FREQUENCY 80MHZ ~ 1000MHZ, field intensity 3v/m FM 1KHZ, modulation depth 80% function is normal, no error action. Surge (impact) immunity: Power Line 1KV, sample working normally, no error action. Constant damp heat: + 40 ± 2 °C, RH (93 + 2-3)% , 48 H SINUSOIDAL VIBRATION: 10 ~ 55 hz, amplitude 0.35 mm 1 octave/min, x, Y, Z direction 30 Min Impact: 15 G, 11 MS, 6 surfaces 3 times, 18 times. Implementation Standard: “GB15210-2003 general technical specification for Metal Detector Gate”/BXTCM-RD portable security gate technical parameters

Colors and styles can be customized